TRI ISO SUPER 9 - The Best Thermal Heat Insulation Solution!

Wall installation is similar to roof application. You will need to batten the wall with a minimum batten that will allow a 20mm air gap. The battens will need as an example could be paced 600 centers apart. Then unroll the heat insulation martial from top to bottom of the wall. Staple the insulation product at 50cm intervals on the battens. The overlap required is between 5cm and 10cm and needs to be taped as well for maximum insulation results. To apply plasterboard you will need nail across the battens through the insulation martial to another layer of battens and then attach the plaster board.